What are you looking for?

Jun 01, I cut this tree last fall and it fell and got wedged. This is how I cut it down. Jan 26, A dirty way to get em down.I knew this tree was going to get hung up, there was no question about it. The real question was, where to fell it, so it makes as. Oct 16, So you make cutting trees neighbours yard normal cut, it gets hung up. Then it looks like you cut through about 3/4 of the way, starting on the top (compressed) side of the tree.

You cut all the way through, leaving a bit on the side away from you, then come back from the bottom of the tree. Mar 30, Start with sawing cut tree hung up on another tree the middle of the hinge so that two corners are saved. Then cut off the corner on the opposite side from the direction in which you intend to roll down the tree.

Cut this corner with repeated saw cuts diagonally from above. Make sure to leave the corner on the same side that you intend to roll down the bushnotch.barted Reading Time: 5 mins.

Sep 30, Mayham, I to pull the bottom of the hungup tree 90 degrees until they fall. But this is a stump in the ground rolled over with the top of the tree hung. Mayham, this could be Dennis's issue here. Are you saying stand under the top of the hungup tree and cut the tree down it's hungup in, with a small calculated excape route as it is all coming down. Follow these steps: 1. Lay branches and poles on the ground in front of the trunk to form a surface. 2. Cut into about half the diameter of the rear of the trunk.

Continue cutting from the other side if the guide bar is 3. Insert a wedge to prevent the cut from pinching. 4. Saw the next cut from. How to safely get down hung up tree.

When I tried to drop this standing dead ash tree it got hung up in nearby maple tree. This is the technique that I us.